Products

Rectiverter product range keeps growing

Eltek continues to expand the range of systems built around the world's first bidirectional power module, providing more flexibility and options for a broad range of applications.

"As we constantly see new use and new applications where the Rectiverter is the ultimate building block, we follow up with system solutions to match these. Eltek is now launching a number of systems which will be available in our standard portfolio." says Morten Schoyen, Eltek CMO.

"Combining Rectifiers and Rectiverters is a competitive alternative when a higher DC capacity is required. Fully integrated into the system, with a single overall system controller and no need for a change-over switch, it is cost and space efficient." Schoyen explains.

New building blocks for Telecom

The modular 4U distribution building block now also includes a combination of rectiverter and rectifier modules into the same system. With this combination we have enabled an output of up to 6 kVA 1phase AC load and up to 24 kW, 48 Vdc load.

The building blocks also features different AC input setup with possibility to mix 3phase input with 1phase AC output, together with 48 Vdc output.

The Rectiverter building block combines both AC and DC feed into one common unit. Simultaneously it provides AC backup power for 230 VAC loads, and 48 VDC power for DC loads and battery charging. The total DC output can be configured up to 24 kW DC load where the limitation for AC load is set to max 6 kVA.

Complete systems for indoor and outdoor telecom applications

Together with the new building blocks we also launch complete systems for indoor and outdoor Telecom applications.

The Rectiverter outdoor system combines both AC and DC feed into one common unit. Simultaneously it provides AC backup power for 230 VAC loads, and 48 VDC power for DC loads and battery charging

The Rectiverter indoor system combines both AC and DC feed into one common unit. Simultaneously it provides AC backup power for 230 VAC loads, and 48 VDC power for DC loads and battery charging.

As we constantly see new use and new applications where the Rectiverter is the ultimate building block, we follow up with system solutions to match these.

Morten Schoyen, Eltek CMO

The Rectiverter outdoor system combines both AC and DC feed into one common unit. Simultaneously it provides AC backup power for 230 VAC loads, and 48 VDC power for DC loads and battery charging

Rectiverter Integrated / Standalone 3 kVA 1phase

The new Rectiverter Integrated/Standalone is a new 3kVA system which can be a standalone Rectiverter system or add inverter functionality to a 48 or 110VDC system.

The system can be integrated into an Eltek DC system and connected to the same controller as the 48 or 110 VDC system, but it can also be used as a standalone system connected to any available 48 or 110 VDC source.

The 3 port converter simultaneously provides power for AC and DC loads. During mains outage the Rectiverter feeds AC loads using energy stored in the battery.

110V building blocks for industrial applications

The Rectiverter systems and modules are now extending the range with support for 110 Vdc. The AC output power from the system and modules will be the same as our 48 Vdc solutions, with different DC output power depending on the application.

Oct 15, 2017
Did you find what you were looking for?
An error has occurred while getting captcha image
To the top